Camille M. George

Associate Professor
School of Engineering
University of St. Thomas
St. Paul, MN 55105
cmgeorge@stthomas.edu

PUBLICATIONS

J. Abraham and C. George, “Full-Building Radiation Shielding for Climate Control in Desert Regions”, International Journal of Sustainable Energy, Vol. 26, No. 3, pp. 167-177, September 2007.

A. Shams, and C. George, “Global Competency: An Interdisciplinary Approach”, Academic Exchange Quarterly, Vol. 10, Issue 4, pp.249-256, Winter 2006. http://www.rapidintellect.com/AEQweb/cho3581z6.htm

J. Weiss, C. George, and J. Walker, “Redesigning an Appropriate Technology Shredder for Manufacture in a Developing Country”, The International Journal for Service Learning in Engineering, Vol.1 No. 1, April 2006.http://www.engr.psu.edu/IJSLE/Vol%201%20No%201%20-%20April%202006/Redesign%20of%20Shredder.pdf

J. Abraham, C. George, “Micro-Geothermal Devices for Low-Energy Air-Conditioning in Desert Climates”, Geo-Heat Center Quarterly Bulletin, Vol. 27 No. 4, pp. 13-15, December 2006.http://geoheat.oit.edu/bulletin/bull27-4/bull27-4-link.htm

A. Shams, C. George, and F. Dunkel, “Minnesota, Montana, and Mali: Unlikely Partners in a Successful Collaboration”, Journal of Higher Education Outreach and Engagement, Submitted for review 2006.

C. George, G. Candler, and E. Pfender, "An Implicit Algorithm to Simulate Reaction Chemistry in a Plasma", J. Phys. D: Appl. Phys., Vol 31, No. 18, 1998, p. 2269-2280.

C. George, G. Candler, R. Young, E. Pfender, and J. Heberlein, "Nozzle Optimization for Dissociated Species Transport in Low Pressure Plasma Chemical Vapor Deposition", Plasma Chemistry and Plasma Processing, Vol 16, No. 1, 1996, p. 43s-56s.

C. Nicolau, C. George, D. Poulikakos, and J. Bowman, "Two-Phase High Speed Flow in a Crevice Between Two Parallel Plates", Chemical Engineering Communications, Vol 120, 1993, p. 15-25.

J.M. Paske, P. Papadopolous, C.M. George, D.M. France, and W.J. Minkowycz, "Steady-State Post-CHF Heat Transfer to a Refrigerant", AIAA Journal of Thermophysics and Heat Transfer, Vol 6, No. 2, 1992, p. 314-320.

C.M. George, D. Poulikakos, and J. Bowman, "High Speed Flow of Air-Oil Mixtures in Converging-Diverging Ducts", International Communications in Heat and Mass Transfer, Vol 18, No. 3, 1991, p. 361-372.

C.M. George, and D.M. France, "Post-CHF Two-Phase Flow with Low Wall-Superheat", Nuclear Engineering and Design, Vol 125, 1991, p. 97-109.

CONFERENCE PAPERS

C. George, E. Amel and C. Greene, “’Lessons with Lunch’ Using a Common Technology with a Global Impact to Address Technology and Data Literacy”, Proceedings of the 2007 American Society for Engineering Education Annual Conference & Exposition, Honolulu, Hawaii, June 2007.

E. Amel, C. George and Y. Ng, “Assessing the Impact of Innovative ME Courses: Creating and Validating Tools”, Proceedings of the 2007 American Society for Engineering Education Annual Conference & Exposition, Honolulu, Hawaii, June 2007.

C. George, E. Amel and K. Mueller, “A Solar-Powered Decorative Water Fountain Hands-On Build to Expose Engineering Concepts to Non-Majors and Foster Technology Literacy”, Proceedings of the 2006 American Society for Engineering Education Annual Conference & Exposition, Chicago, Illinois, June 2006.

C. George, “Fuel Cells and Discovery-Oriented Teaching”, Proceedings of the 2004 American Society for Engineering Education Annual Conference & Exposition, Session 2233, Salt Lake City, Utah, June 2004.

C. George, G. Candler, C. Laux, C. Kruger, “Computational Analysis of Diffuse Discharges in Atmospheric Pressure Air”, AIAA 2002-2223, 33rd AIAA Plasmadynamics and Lasers Conference, May 20-23, 2002, Maui, HI.

 C. George, E. Pfender, and G. Candler, “Forced Diffusion Effects in the Simulation of a Non-Transferred DC Arc”, AIAA 98-0996, 36th Aerospace Sciences Meeting, January 12-15, 1998, Reno NV.

C. George and E. Pfender, “Numerical Simulation of a Multi-Component Non-Transferred Constricted DC Arc”, 13th International Symposium on Plasma Chemistry, ISPC-13, Beijing, China, August 1997, Symposium Proceedings Vol I, p. 314-319.

C. George and E. Pfender, “On the Numerical Coupling of an Aerodynamic Flow Field with a DC Electromagnetic Field”, Plasma Workshop at the Technical University of Ilmenau, Ilmenau, Germany, June 1997, Workshop Proceedings, p. 41-46.

C. George, E. Pfender, and H.-D. Steffens, “Numerical Simulation of a Multi-Component Reacting Flow in a Supersonic DC Torch Nozzle”, National Thermal Spray Conference, Cincinnati, Ohio, October 1996, Proceedings of the 9th National Thermal Spray Conference, p. 595-602.

C. George and E. Pfender, “Dissociated Species Transport in Low Pressure Plasma Chemical Vapor Deposition”, Plasma Workshop at the Technical University of Ilmenau, Ilmenau, Germany, June 1995.

CONFERENCE PRESENTATIONS

J. Abraham and C. George, “Full-Building Radiation Shielding for Climate Control in Desert Regions”, Presentation at Solar 2007, the Annual Conference of the American Solar Energy Society, Cleveland, Ohio. July 7-12, 2007.

A. Shams, C. George, and F. Dunkel, “The new ‘3-M’: Minnesota, Montana and Mali: The Synergy of Collaborative International Service-Learning”. Presentation at the sixth International Service-Learning Research Conference. Portland Oregon. October 13-16, 2006.

C. George, S. Cramer, K. Jasch, S. McIntyre, K. O’Malley, J. Reed, B. Ragozzino, and J. Xiong., “A Solar Powered Water Pasteurizer for Sub-Saharan Africa. Presentation at the 4th Annual Engineers for a Sustainable World Conference: Envisioning Sustainability. Iowa City, Iowa. September 29th, 2006.

C. George, E. Amel and K. Mueller, “A Solar-Powered Decorative Water Fountain Hands-On Build to Expose Engineering Concepts to Non-Majors and Foster Technology Literacy”, Presentation at the 2006 American Society for Engineering Education Annual Conference & Exposition, Chicago, Illinois, June 2006.

C. George and J. Abraham., “A Sustainable Low Energy Cooling System for Hot Dry Climates. Presentation at the 3rd Annual Engineers for a Sustainable World Conference: Sustainability as Security. Austin, Texas. October 7th, 2005.

C. George, and B. Sain, “Education for Human Development: Evaluating a Senior Design Project in Mali through the Lens of Christian Theology”, Presentation at the Conference on the role of Engineering at Catholic Universities, Sept 23rd, 2005, University of Dayton, Dayton Ohio.

C. George and A. Shams, “Design of a Breadfruit Shredder and Dehydrator: A Collaborative Project”. Presentation at the 2nd Annual Engineers for a Sustainable World Conference: Solutions for a Shrinking Planet. Stanford, California. September 30th, 2004.

C. George, “Fuel Cells and Discovery-Oriented Teaching”, Presentation at the 2004 American Society for Engineering Education Annual Conference & Exposition, Session 2233, Salt Lake City, Utah, June 2004.

Updated August 29, 2008